Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 109

Frame Guides
Tap the left or right arrows in the 'frame guides' menu setting to cycle through frame guide
options for all outputs on your URSA Mini, including EVFs such as Blackmagic URSA Viewfinder.
The options are detailed in the 'touchscreen features' section of this manual, and are also
accessible from the LCD monitoring menu in your LCD touchscreen head up display. It's worth
noting that you can individually select whether frame guides will appear on your
LCD touchscreen, front SDI and main SDI output in their respective 'monitor' menus.
Guide Opacity
Tap the left or right arrows in the 'guide opacity' menu setting to choose the opacity of the
areas blocked out by frame guides on your LCD touchscreen, front and main SDI outputs.
The options are 25%, 50%, 75% and 100%.
Focus Assist
Your URSA Mini camera has two focus assist modes, 'peak' and 'colored lines.'
Peak
When 'peak' style focus assist is selected, areas of the shot that are in focus are heavily
sharpened on your LCD touchscreen or SDI outputs, but not in the recorded image
itself. This causes focused parts of your shot to 'pop' out of the softer background on
screen. As no additional overlays are used, this can be a very intuitive way to tell when
focus is dialled in, especially when the subject you're focusing on is physically well
separated from other elements in shot.
Colored Lines
When 'colored lines' style focus assist is selected, a colored line is superimposed
around the parts of the image that are in focus. This can be a little more intrusive than
'peak' style focus assistance as the lines are drawn over your image, but especially in
busy shots with a lot of visible elements, it can be a precise focus aid.
Focus Assist Level
To set the level of focus assistance for your LCD touchscreen, front SDI and main SDI, tap the
'low,' 'medium' or 'high' setting.
NOTE Setting the focus assist level does not affect whether focus assistance is
enabled on your URSA Mini's LCD touchscreen or SDI outputs. You'll still need to turn
focus assistance on individually for each output in the 'LCD,' 'front SDI, or 'main SDI'
monitor menus.
Settings 109