Blackmagic Ursa Mini Pro B4 Mount - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Blackmagic URSA Mini Pro B4 Mount

With the B4 mount attached to your URSA Mini Pro 4.6K G2 or URSA Mini Pro 4.6K, you can
mount par-focal zoom lenses commonly used for electronic news gathering and wedding
videos. These lenses maintain focus throughout large zoom ranges and typically have manual
focus and iris control, plus a zoom rocker on the hand grip allowing you to smoothly ease in and
out of the zoom. For single operators, using these lenses makes shooting very fast and efficient
with exceptional control over the shot. It is important to note that Blackmagic URSA Mini Pro B4
mount is not compatible with URSA Mini Pro 12K.
The B4 mount kit includes:
Tools Required
When attaching the B4 mount, you will need a 2mm Hex driver. While it's not absolutely
required, we recommend using a torque wrench able to accurately set a maximum torque
of 0.45Nm to reduce the potential of over tightening the screws.
2mm Hex driver
1 x B4 mount
The B4 mount lets you use industry standard ENG lenses with
your URSA Mini Pro.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm 0.18mm
0.30mm 0.15mm
0.20mm 0.12mm
5 x 2mm Hex M2.5 x 12mm mount screws
The five M2.5 x 12mm HEX screws are exclusive to the B4 so you
can keep the screws together with the respective mount.
The B4 mount kit also comes with a full spare sets of screws in
case the originals are misplaced.
0.10mm
0.05mm
0.025mm
Interchangeable Lens Mount 218