Ursa Mini Shoulder Mount Kit - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

URSA Mini Shoulder Mount Kit

Attaching the shoulder mount
The URSA Mini Shoulder Mount Kit lets you carry URSA Mini on the shoulder for ENG style
shooting. This kit includes a top handle, shoulder mount baseplate, extension arm for the
optional Blackmagic URSA Handgrip, long LANC cable, Viewfinder adapter plate, plus all the
required screws.
The quick release mount on the baseplate lets you lock your camera into an ENG style tripod
plate or place it on your shoulder so you can follow the action.
The URSA Mini Shoulder Mount Kit works with any tripod plate modeled after the Sony VCT 14.
These mounts are easily found at camera stores or online.
It's also worth mentioning that mounts modeled after the VCT U14 tripod plate are a different
system and are not compatible.
When attaching the shoulder mount kit, you will need the following tools:
‚ 1 x flat head screwdriver for the 2 x ¼" shoulder mount base plate screws.
‚ 1 x 3/16" Hex key driver for the 2 x ¼" top handle screws.
‚ 1 x 2.5mm Hex key driver for the 4 x Viewfinder adapter plate M3 screws.
To attach the shoulder mount kit to your URSA Mini you will need a
large flat head screwdriver, a 3/16" Hex key driver for the top handle
and a 2.5mm Hex key driver for the Viewfinder adapter plate
To attach the shoulder mount baseplate
Insert screws via
threaded hole in slot
2 x ¼" baseplate screws
URSA Mini Shoulder Mount Kit 147