Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 123

URSA Mini Pro 12K includes a 'focus zoom' option. For information on how to use
'focus zoom' when it is enabled on the LCD, see the 'focus zoom' section. When
'focus zoom' is enabled for your SDI outputs, you can move its region of zoom around
using the 'menu' wheel and adjust the magnification level using the 'iris' wheel.
Focus zoom can be applied to any of the monitoring outputs selectively. For finding
critical focus, applying it to all three outputs at will give the sharpest results.
Using the 'Toggle On/Off' behavior also lets you select the output this setting applies
to. Simply tap any combination of 'LCD,' 'front SDI' and 'main SDI' to select. If the output
for an option is not available, such as 'color bars' which always applies to all outputs,
the 'LCD,' 'front SDI', and 'main SDI' settings are disabled. On URSA Mini Pro models
you can disable the function and HFR buttons by selecting 'none'.
NOTE When 'focus zoom' is set and applied to all 'LCD', 'front SDI' and 'main
SDI' outputs, any 3D LUT or focus assist settings applied to the 'front SDI' will
apply to all three outputs when zoomed. Frame guides, grids and safe area
guides will not be displayed when zoomed.
You can also configure URSA Mini Pro 4.6K G1 to use the 'ret' and 'vtr' buttons
on a B4 lens as function buttons. For example, if ISO recording is happening with a
HyperDeck, a popular option is to set 'vtr' to act as a 'push to talk' button.
Status LED
URSA Mini Pro cameras have a small status LED near the 'rec' button on the forward
control panel to provide tally and status information. Use the 'status LED' setting to
Settings 123