Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 108

SDI Output
Both outputs allow you to choose between progressive and interlaced HD output, while your
URSA Mini's main SDI output also has to option of progressive Ultra HD.
The options available in this setting depend on your camera's resolution and frame
rate settings.
Progressive HD, or '1080p' is always available regardless of your recording resolution and
frame rate, while interlaced HD, or '1080i' is available when your project frame rate is set to 50,
59.94 or 60.
Ultra HD SDI output, or '2160p' is available on your URSA Mini's main SDI when shooting at
Ultra HD resolutions.
SDI Output – front SDI
SDI Output – main SDI
3G SDI Level
On URSA Mini Pro you can change the 3G-SDI output standard to maintain compatibility with
equipment that can only receive level A or level B 3G-SDI video. This option will only appear
when you are operating in 50, 59.94 or 60 frames per second and outputting 1080p. Tap the
A or B icon to select each standard.
On URSA Mini Pro 4.6K G2, select level A or
level B for your 3G-SDI output standard
All Monitor Settings 1
Monitor settings that affect all of your URSA Mini's outputs are grouped within the 'all' menu.
For example, setting 'safe area guide %' to 90% in this menu will set the safe area guide to 90%
for your camera's LCD, front SDI and main SDI outputs.
There are two pages of 'all' settings. The first page of your URSA Mini's 'all' monitor tab contains
the following settings.
Settings 108