Using The Menu - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Using the Menu

Pressing the up and down arrow buttons will scroll through the four possible sources 'camera',
'return 1', 'return 2' and 'return 3'. Press the 'menu' button to enter the menu system and adjust
your settings. The arrow buttons can then be used to navigate through the various menu
screens and the options within each screen, whilst the 'set' button will confirm your selection.
The settings in the menu are divided between 'audio', 'talkback' and 'setup' pages.
Press the up and down arrow buttons to scroll through the four
possible sources and to navigate through the menu
Audio
The 'audio' page lets you adjust the input levels for audio sources connected to the
XLR inputs on your Blackmagic Camera Fiber Converter.
Use the arrow buttons to adjust the input level for
each XLR input and the 'set' button to set the level
You can configure which audio channels from the Camera Fiber Converter get mapped
to the embedded SDI and XLR outputs. The embedded audio channels from URSA Mini
Operating the Studio Fiber Converter 193