Descargar Imprimir esta página

Left Side - Ursa Mini; Left Side - Ursa Mini Pro - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para URSA Mini:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1166
5
Auto White Balance
The auto white balance button is marked 'Auto W/B' and is used when you want to set
the white balance based on what is currently in the center of the screen. For example,
setting auto white balance on a gray card placed in front of the lens. See the section
'URSA Mini Pro control buttons' for more information.
Left Side – URSA Mini
URSA Mini's left side panel lets you insert CFast cards, access the control panel and change
settings. The USB port is located just above the CFast slots so you can easily plug into a
computer when updating your URSA Mini's internal software.
6
6
Fold Out Touchscreen
5 inch fold out touchscreen monitor, pivots for viewing at different camera heights.
Refer to the 'touchscreen controls' section for more information.
7
Audio Level Adjustment Knobs
Adjustment knobs to set the recording levels for audio channels 1 and 2.
Refer to the 'URSA Mini controls' section.
8
Mini USB Port
Mini USB Port for updating internal software. Refer to the 'Blackmagic Camera Setup
Utility' section for more information.
9
Control Panel Buttons
Buttons for powering the camera, record and playback control, focus peaking,
accessing the settings menu, plus iris and auto focus control on compatible EF lenses.
Refer to the 'URSA Mini controls' section for more information.
10
Memory Card Slots
Insert CFast 2.0 cards into the slots for record and playback. Refer to the
'storage media' section.
Left Side – URSA Mini Pro
URSA Mini Pro's left side panel features additional controls for easy access to all of your
camera's essential functions. These controls are split between the forward control panel, the
ergonomic control panel located on the outside of the foldout touchscreen monitor, and a
control panel on the inside of the foldout monitor.
CFast and SD card slots are located behind the foldout monitor. The USB-C port is above these
memory card slots, and is used to connect to a computer to update your URSA Mini Pro's
internal software.
8
7
10
9
Introduction to URSA Mini
52

Publicidad

loading

Este manual también es adecuado para:

Ursa mini pro