Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 259

‚ Double-click within the color ring:
Resets the color adjustment without resetting the master wheel adjustment for
that control.
‚ Click the reset control at the upper-right of a color ring:
Resets both the color balance control and its corresponding master wheel.
Lift, gamma and gain color wheels in the color corrector panel
Master Wheels
Use the master wheels below the color wheels to adjust each YRGB channels' lift, gamma and
gain controls.
To make adjustments using the master wheel:
‚ Drag the master wheel left or right:
Dragging to the left darkens the selected parameter of the image, dragging to the right
lightens that parameter. As you make an adjustment, the YRGB parameters underneath
change to reflect the adjustment you're making. To make a Y-only adjustment, hold
down the ALT or Command key and drag left or right. Because the color corrector uses
YRGB processing, you can get quite creative and create unique affects by adjusting the
Y channel only. Y channel adjustments work best when the Lum Mix setting is set to the
right side to use YRGB processing vs the left side to use regular RGB processing.
Normally, most DaVinci Resolve colorists use the YRGB color corrector as you get a lot
more control of color balance without affecting overall gain, so you spend less time
getting the look you want.
Adjust the master wheels by dragging
the wheel control left or right
Understanding Studio Camera Control 259