Working With Third Party Software; Working With Files From Cfast 2.0 And Sd Cards - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Working with Third Party Software

To edit your clips using your favorite editing software, you can copy your clips to an internal/
external drive or RAID and then import your clips into the software. Or import your clips
directly from your storage media using a dock or adapter for your CFast or SD card or SSD.
NOTE Blackmagic RAW is supported in DaVinci Resolve 15.3.1 and later and has also
been adopted by a wide range of third party post-production editing programs.
Plugins for editing Blackmagic RAW in Avid Media Composer and Adobe Premiere Pro
are available with Blackmagic RAW software, which you can download from
www.blackmagicdesign.com/support.

Working with Files from CFast 2.0 and SD cards

Edit directly from your CFast card by removing it from your camera and mounting
it on your computer using a CFast 2.0 reader/writer or CFast drive
To import your clips from a CFast 2.0 or SD card:
1 Remove the CFast or SD card from your Blackmagic URSA Mini or URSA Mini Pro.
Mount the CFast card to your Mac or Windows computer using a CFast or
SD card reader.
2 Navigate to the card on your operating system to open it and you will see your list of
Blackmagic RAW or QuickTime movie files.
3 Now you can simply drag the files you want from the card onto your desktop or
another hard drive, or you can access the files straight from the card using your
editing software.
4 Before you unplug the CFast or SD card from your computer, it is important to always
eject your CFast or SD card from either Mac or Windows. Removing your card without
ejecting can corrupt footage in some cases.
Working with Third Party Software 263