Using Camera Control - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

5 Navigate to the 'monitor' menu and ensure that you have selected 'clean feed' for
'main SDI' to ensure that you don't see overlays or the focus box on the SDI output to
the ATEM switcher.
Connect your URSA Mini to any of the ATEM switcher's SDI inputs

Using Camera Control

Launch ATEM Software Control and click on the camera button located at the bottom of the
software window. You'll see a row of labeled camera controllers containing tools to adjust and
refine each camera's image. The controllers are easy to use. Simply click the buttons using your
mouse, or click and drag to adjust.
Camera Control Selection
The button row at the top of the camera control page lets you select the camera number you
would like to control. If you have more cameras that fit onto the window size, or you are running
the color corrector window, then you can use these buttons to select between which camera
you would like to control. If you are using an Aux output for monitoring your camera control,
pushing these buttons to change the camera to control will also send that camera's video
output to the Aux output setup in the switcher preferences.
Click on the settings icon to select
the Aux output for camera control
Channel Status
The channel status at the top of each camera controller displays the camera label, On Air
indicator and lock button. Press the lock button to lock all the controls for a specific camera.
When on air, the channel status illuminates red and displays the On Air alert.
Each camera controller displays the channel status so you
know which camera is on air. Use the color wheels to adjust
each YRGB channel's lift, gamma and gain settings
Understanding Studio Camera Control 252