Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 128

When selecting 'factory reset' you will be prompted to confirm your action
Black Shading
On URSA Mini cameras using the 4.6K sensor, the black shading feature optimizes image
quality by balancing the black levels on the sensor. It is best to carry out this process after your
camera has warmed up and has been running for a few minutes. To carry out a black shading
calibration you will need to place the dust cap on the camera, or place the lens cap on the lens
and then press the 'calibrate' button. You will be asked to confirm this action, as you require the
correct setup for this to function correctly. Calibration will take a few seconds, and you will be
notified when the process is completed. Your camera will remember the last date and time that
black shading was completed. This will optimize image quality in the shadows.
URSA Mini Pro 4.6K G2 has an additional calibration feature as part of the black shading
process, which allows you to recalibrate pixels for improved black levels. This will take
approximately one minute to complete.
1
Black shading calibration recommended
Motion Sensor Calibration
To calibrate the horizon meter on URSA Mini Pro 12K, place your camera on a surface you know
is level and tap the 'calibrate motion sensor' button. It is essential that you keep the camera
stable during calibration. The process takes approximately five seconds to complete.
Settings 128