Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 150

Attaching the extension arm
When using the URSA Mini shoulder mount kit with the Blackmagic URSA Handgrip, you'll
need to reposition the handgrip for comfortable shoulder based shooting. Use the
bundled extension arm and longer LANC cable to move the handgrip to a more ergonomic
position. The USRA Mini extension arm is also available as a separate accessory from
Blackmagic Design resellers.
To attach the extension arm:
1 Place your URSA Mini on a flat, stable surface allowing room next to the camera to
lower the extension arm. Mounting URSA Mini to a tripod is helpful for this purpose.
2 Attach the indented end of the extension arm to the baseplate rosette, lower the arm to
suit, and fasten with the supplied rosette thumbscrew.
3 Attach the handgrip to the extension arm's front rosette. Fasten by tightening the
handgrip screw with the large flat head screwdriver, or by twisting the D ring with your
thumb and forefinger.
4 Connect the Blackmagic URSA Handgrip's LANC output to the camera LANC input
using the long LANC cable supplied with your shoulder mount kit.
You can easily adjust the extension arm and Blackmagic URSA Handgrip to suit your preference
by loosening the rosette screws, making your adjustment, then retightening.
With your URSA Mini Shoulder Mount Kit now attached, you have additional speed for fast
shooting on the run, plus the ability to quickly mount your camera on a tripod for tight,
stable shots!
Extension arm attaches to
baseplate rosette
Handgrip extension arm
Connect the handgrip to the camera using the long LANC
cable supplied with the kit
Blackmagic URSA Handgrip
Tighten via handgrip screw
URSA Mini Shoulder Mount Kit 150