Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 165

9 Tally Light
The large tally light on the rear of the Blackmagic URSA Studio Viewfinder lets both the
talent and operator know which camera is on the air, which camera is about to be on air,
and if they are ISO recording. The tally illuminates red for on-air, green for preview and
when used with URSA Mini will illuminate orange for ISO record.
As the director cuts between cameras on the ATEM switcher, tally information is sent
back to the camera over SDI so the light is lit when the camera is being previewed to
switch to, on the air or recording. In addition, the URSA Studio Viewfinder also includes
clip-on transparent camera numbers that attach to the tally light, making it easy for
talent to clearly see camera numbers from up to 20 feet away.
We have included editable PDF's in the software installer that allows you to edit and
print out your own tally numbers to match the ones provided, and also to create your
own custom tally number inserts. After installing Camera 4.1 software these can be
found on a Mac in the Application > Blackmagic Cameras > Documents folder and on
a PC in the Blackmagic Design > Documents folder.
The tally light will illuminate according to the ATEM switching operations, and when the
camera is not connected to a switcher the tally light will illuminate red as a simple
record tally indicator. Refer to the 'understanding studio camera control' section in this
manual for more information.
TIP When using the Blackmagic URSA Studio Viewfinder with an ATEM switcher, it is
important to select 'clean feed' on URSA Mini to ensure that you don't see overlays or
the focus box on the SDI output to the ATEM switcher. Navigate to the 'monitor' menu
on URSA and select 'clean feed' for 'main SDI'.
9
Blackmagic URSA Studio Viewfinder 165