Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 229

Contrast
Defaulting at 1.0, drag the slider to the left for the least amount of contrast at 0 or to the
right to increase the contrast up to 2.
Midpoint
In Blackmagic Design Film, your middle gray value defaults to 0.38, or 38.4%. Drag the
slider to the left to lower your midpoint or to the right to raise it to 100. When contrast is
adjusted away from the default setting, you can modify your highlight and
shadow rolloff.
Highlight Rolloff
Adjust the highlights by dragging the slider to the left to lower the value to 0, or to the
right to increase the highlights to 2. The default value is 1.
Shadow Rolloff
Drag the slider to the left to lower your shadows to 0 or to the right to raise your
shadows to 2.
White Level
Adjust the white point of the gamma curve by dragging the slider from the highest
value of 2 to the lowest value of 0. The default value is 1.
Black Level
Raise the black point of the custom gamma curve by dragging the slider to the right
from the lowest value of -1 to a maximum of 1. The default value is 0.
Use Video Black Level
Check the box to set your black levels to video.
Export Frame
Clicking the 'export frame' button lets you export a single frame from your
Blackmagic RAW clip.
Update Sidecar
Click this button to update the Blackmagic RAW sidecar file for the current clip.
Any changes you have made to your Blackmagic RAW clips will be identified by the gamma
setting changing to Blackmagic Design Custom.
If you want to revert your clip to one of the default gamma options
available, simply select it from the gamma dropdown menu.
Using DaVinci Resolve 229