Ursa Mini; Getting Started; Attaching A Lens - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

URSA Mini

Aside from the sensors used, URSA Mini 4K and 4.6K models are nearly identical. The control
buttons and software menus are laid out the same way, and operating the cameras is
essentially the same. You'll simply find a few more resolution options on cameras using the
4.6K sensor, together with a greater range of ISO settings. An easy way to tell which sensor
your camera has is to look for a '4K' or '4.6K' icon above the lens mount.
URSA Mini, left side
It's also worth noting that URSA Mini cameras are available with EF and PL lens mounts.
An easy way to tell the difference between these is the presence of a 12 pin broadcast lens
connector near the lens mount on PL models, and of course, the mounts themselves if you are
familiar with EF and PL mounting systems. See the 'getting started' section for more information
on these mounts.
Now that you know how to identify the different URSA Mini models, you can get started
using your camera!

Getting Started

Getting started with your Blackmagic URSA Mini is as simple as mounting a lens, and powering
your camera.

Attaching a Lens

Attaching a lens to your camera is the same process for all URSA Mini cameras, however the EF,
PL, B4 and F mounts have slightly different ways of operating. In all cases, the first step is to
remove the protective dust cap.
To remove the protective dust cap from the EF lens mount, hold down the locking button and
rotate the cap counterclockwise until it is released. For the PL and B4 mount lenses, rotate the
locking ring counterclockwise and pull the protective dust cap away from the mount. For the F
mount, hold down the locking button and rotate the cap clockwise until it is released.
NOTE Blackmagic URSA Mini Pro features an interchangeable lens mount capable
of accepting EF, PL, B4 and F mount lenses, as well as additional lens mounts with
accessories. For more information on switching between mount types on
URSA Mini Pro, refer to the 'interchangeable lens mount' section in this manual.
Getting Started 8