Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 87

Additional status indicators may appear around the duration display:
Appears to the left of the duration display when your
URSA Mini is using a windowed sensor mode.
Appears to the right of the duration display when showing timecode.
Appears to the right of the duration display if an external timecode
is connected and valid.
Appears to the right of the duration display if the camera is running
off an internal timecode after being 'jam synced' and disconnected.
Appears to the right of the duration display when
you are viewing 'preset record run' timecode.
Appears when a valid reference source is connected and locked,
based on the reference input settings.
ISO
The 'ISO' indicator displays your URSA Mini's current ISO setting, or light sensitivity. Tapping this
indicator lets you adjust your ISO to suit varying lighting conditions. The ISO range on
URSA Mini is from ISO 200 to 1600, whilst the ISO range on URSA Mini Pro can also be
increased to 3200.
The optimum ISO for URSA Mini 4K is 400. The optimum ISO for URSA Mini 4.6K and
URSA Mini Pro is 800.
Your URSA Mini's ISO indicator. Tap this to access ISO settings
While in the 'ISO' menu, your URSA Mini's ISO settings appear along the
bottom of the LCD touchscreen. URSA Mini Pro 4.6K G2 provides a slider
below the presets for adjusting your ISO in 1/3 stop increments.
Numerical presets provide the option to select an ISO setting in full stop increments by tapping
on the number. URSA Mini Pro 4.6K G2 provides a slider below these presets, that allows you to
fine tune your ISO setting in between these presets in 1/3 stop increments.
Depending on your situation, you may choose a lower or higher ISO setting. For example,
in low light conditions ISO 1600 can be suitable when shooting on URSA Mini 4.6K but may
introduce some visible noise. In bright conditions ISO 200 can provide richer colors.
Touchscreen Controls 87