Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 119

Display ND Filter As
Use this setting to adjust how the ND filter indicator on your URSA Mini Pro displays your
ND filter setting. Each setting corresponds to a different camera convention. Cinematographers
typically use ND.number notation, while those familiar with DSLRs or broadcast cameras may
prefer this information in f-stop format, or as a fraction of available light. These options are
available here as 'number,' 'stop,' and 'fraction,' respectively.
Setup menu in URSA Mini Pro with the option to
customize how the ND filter information is displayed
It's worth mentioning that the 'program audio' setting is only available on URSA Mini Pro.
ATEM Camera ID
If you're using URSA Mini with an ATEM Switcher and want your camera to receive tally signals
from the switcher, you'll need to set the camera number on your camera. This ensures the
switcher sends the tally signal to the correct camera. The camera number can be set to a value
of 1-99 by tapping the left or right buttons. The default setting is 1.
Color Bars
Outputting color bars rather than a preview image can be useful when connecting your
URSA Mini to a switcher or external monitor. The appearance of your URSA Mini's color bars
on your switcher or monitor confirms the connection, and you can perform basic
monitor calibration based on the colors of the bars. To turn on color bars for all outputs on
your URSA Mini, including the LCD touchscreen, simply tap the 'color bars' switch icon.
Settings 119