Updating Ursa Mini Recorder's Internal Software - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Updating URSA Mini Recorder's internal software

Update your URSA Mini Recorder using the Blackmagic Camera Setup Utility software. The
Mini Recorder will need to be powered when updating, so we recommend keeping the
Mini Recorder connected to URSA Mini Pro 12K during the update process. This also means
your camera will need to supply consistent power, so be sure to plug into external power or
battery pack.
Connect your computer to the Mini Recorder with a USB-C cable and launch Blackmagic
Camera Setup Utility. You will be prompted to update if your computer detects that your
URSA Mini Recorder is using outdated version. Follow the on screen prompts to update your
URSA Mini Recorder's internal software.
NOTE Refer to the 'Blackmagic Camera Setup Utility' section in this manual
for more information.
TIP We recommend updating all your Blackmagic URSA equipment at the same time
for optimized performance.
URSA Mini Recorder 288