Blackmagic Fiber Converters - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Blackmagic Fiber Converters

Blackmagic Camera Fiber Converter and Blackmagic Studio Fiber Converter are optional
accessories that provide a SMPTE fiber connection between your camera and an
ATEM switcher.
SMPTE fiber lets you connect all video, power, talkback, tally and camera control signals
between an ATEM switcher and your camera using one single industry standard SMPTE
hybrid fiber optic cable. Using a SMPTE fiber connection greatly reduces the amount of
cables required, which helps makes the production setup more efficient and simpler to run.
The standard connectors on Blackmagic Studio Fiber Converter allow you to easily add the
fiber converters into an existing broadcast truck infrastructure.
Blackmagic Camera Fiber Converter
Mounts to the back of your URSA Mini
or URSA Broadcast and connects to
the Blackmagic Studio Fiber Converter
via a standard SMPTE hybrid 304
connector.
The Blackmagic camera and studio fiber converters connect via optical fiber to provide efficient
SDI video, power, talkback, tally and control signals via a single SMPTE fiber optic cable.
Blackmagic Studio Fiber Converter
This converter converts the optical fiber
SDI signal from the camera unit to SDI
via BNC, which is then connected to
an ATEM switcher. The converter also
takes all return feed sources, including
program return from the ATEM switcher,
and sends them back to the camera unit.
Blackmagic Fiber Converters 174