Publicidad
Idiomas disponibles
Idiomas disponibles
Updating Internal Software
From time to time Blackmagic Design releases updates that can enhance and enable features
on your Blackmagic Fiber Converters. We recommend checking the Blackmagic Design
website regularly to ensure your fiber converters are using the latest internal software. Update
your Fiber Converters using the Blackmagic Camera Setup Utility software.
The USB-C ports on the Blackmagic Fiber converters let you update their internal software.
Updating Blackmagic Camera Fiber Converter
Your Camera Fiber Converter will need to be powered when updating, so we recommend
keeping the converter connected to URSA Mini or URSA Broadcast during the update process.
It's important that you unplug the SMPTE Fiber cable from your Camera Fiber Converter, and
power your camera via the supplied URSA camera Power Supply instead for consistent power.
Blackmagic Camera Fiber Converter has a USB-C connector on the right side of the unit for
updating its internal software. Connect your computer to this USB connector and launch
Blackmagic Camera Setup Utility. You will be prompted to update if your computer detects that
your Camera Fiber Converter is using an outdated version. Follow the on screen prompts to
update your converter's internal software.
Updating Blackmagic Studio Fiber Converter
Your Studio Fiber Converter will need to be powered when updating, so we recommend
keeping the IEC power cable plugged into the power connector on the studio unit's rear panel
during the update process.
Blackmagic Studio Fiber Converter has a USB-C connector on the front of the unit for updating
its internal software. Connect your computer to this USB connector and launch Blackmagic
Camera Setup Utility. You will be prompted to update if your computer detects that your Studio
Fiber Converter is using an outdated version. Follow the on screen prompts to update your
converter's internal software.
Updating Internal Software
208
Publicidad
Capítulos
