Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 78

To toggle the appearance of grids on your URSA Mini touchscreen, tap the switch icon in the
bottom left of the screen while in the 'frame guides' tab.
When your URSA Mini is set up and connected to an ATEM switcher as the current program
source, and 'grids' are set to 'on', the red 'program' tally outline will automatically illuminate
on your LCD.
When connected to an ATEM switcher sending a tally signal, a red border will
appear around your camera's image preview when grids are set to 'on'
To set which overlay you want to display on all URSA Mini outputs, tap the options at the bottom
of the display for 'thirds', 'crosshairs' or 'center dot'. URSA Mini Pro 12K also includes a
'horizon' option.
The rule of thirds grid automatically scales to any on screen frame guides
Thirds
The 'thirds' setting displays a grid with two vertical and horizontal lines placed in each
third of the image. Thirds are an extremely powerful tool to help compose your shots.
For example, the human eye typically looks for action near the points where the lines
intersect, so it's helpful to frame key points of interest in these zones. An actor's eyeline
is commonly framed along the top third of the screen, so you can use the top horizontal
third to guide your framing. Thirds are also useful to maintain framing consistency
between shots.
Touchscreen Controls 78