Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 13

You can use industry standard third party external batteries such as V mount or Gold Mount
batteries with your URSA Mini. Refer to the 'mounting batteries' section for more information
about mounting the different types of battery plates to support different batteries.
To turn on URSA Mini:
1 Press and release the 'power' button. On Blackmagic URSA Mini, the power button is
located on the control panel behind the fold out LCD. Simply open the LCD to access
the control panel.
2 Press and hold the 'power' button to turn your camera off.
You are now ready to insert CFast 2.0 cards and start recording!
To turn on your URSA Mini, open the fold out LCD touchscreen, then press and
release the power button on the control panel. Press and hold to turn off
TIP When turning the camera on, make sure you promptly press and release the
button. Your camera will take approximately 10 seconds to boot up, but there is no
need to press the button again. When turning off, press and hold the button until the
camera powers off.
Getting Started 13