Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 113

Noise Reduction
Command
Enabled:
Bias:
Split screen:
Red overlay:
Ping
Determine if the Teranex Server is responding.
Preset
Please note: PresetName0: refers to Preset 1, PresetName1: refers to Preset 2, etc.
Command
PresetName0:
PresetName1:
PresetName2:
PresetName3:
PresetName4:
PresetName5:
Recall:
Save:
Protocol Preamble
The Teranex Server will respond with the current protocol version.
This information cannot be changed by the user.
PROTOCOL PREAMBLE:
Version: 3.18
Command Description
Enable Noise Reduction. False = OFF; True = ON
Adjust the Bias level. Range is -3 to +3
Enable NR before/after split screen. False = OFF; True = ON
Enable NR Red Overlay. False = OFF; True = ON
Command Description
Displays all current user-defined preset names.
Command is used to assign a new name to Preset 1.
Displays all current user-defined preset names.
Command is used to assign a new name to Preset 2.
Displays all current user-defined preset names.
Command is used to assign a new name to Preset 3.
Displays all current user-defined preset names.
Command is used to assign a new name to Preset 4.
Displays all current user-defined preset names.
Command is used to assign a new name to Preset 5.
Displays all current user-defined preset names.
Command is used to assign a new name to Preset 6.
Recalls a previously saved preset, 1-6. (e.g. Recall: 1)
Saves a new set of parameters to the designated preset,
1-6. (e.g. Save: 1)
Developer Information 113 113