Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 959

ACK ↵
↵
MODE3D: ↵
3D roll left: 20 ↵
3D roll right: 0 ↵
↵
Command
3D roll left:
3D roll right:
3D tilt left:
3D tilt right:
3D toeIn left:
3D toeIn right:
3D flip left:
3D flip right:
Network Config
Command
Friendly name:
DHCP enabled:
IP address:
Gateway:
Command Description
Adjust the Left Eye Z axis image rotation.
Range is -400 to +400 units. (Default = 0)
50 units = 1 degree. (1 unit = 0.02 degree)
Adjust the Right Eye Z axis image rotation.
Range is -400 to +400 units. (Default = 0)
50 units = 1 degree. (1 unit = 0.02 degree)
Adjust the Left Eye X axis image tilt.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
Adjust the Right Eye X axis image tilt.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
Adjust the Left Eye Y axis image toe-in.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
Adjust the Right Eye Y axis image toe-in.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
Flip the Left Eye image. Values are:
Off, Horizontal, Vertical, Both
Flip the Right Eye image. Values are:
Off, Horizontal, Vertical, Both
Command Description
Displays the current user-defined name assigned
to the device. Command is used to assign a new
name to the device.
Although not advised, user may enable/disable
DHCP. True = enabled; False = disabled
Displays current IP address as an integer.
Cannot be changed by the user.
Displays current gateway as an integer.
Cannot be changed by the user.
959 959