Getting Started
Plugging in Power
Getting started with your Teranex processor is as easy as plugging in power and connecting
your signal input and output.
To supply power, plug in a standard IEC power cable to your Teranex processor's power input
on the rear panel.
Plugging in Video
Plug your source video input into your Teranex processor's video input, and plug the video
output into your destination equipment. Note that all video outputs are simultaneously active so
you can connect to more equipment if needed. Confirm the signal by checking the LCD on the
control panel. The LCD can display the input or output video, pressing the 'in' or 'out' button will
set the display accordingly. The LCD also gives details about the video format and frame rate.
The Teranex Express and AV also display timecode and audio levels.
Plugging in Audio
If you are connecting SDI video, then you already have audio connected as it is embedded in
the SDI video signal. On Teranex processors with XLR connectors you can also plug in analog
or AES digital audio.
VIDEO
AUDIO
FORMAT
IN
SDI
486
EMBED
HDMI
AES
720
2K
OUT
ANLG
ANLG
1080
VIDEO
AUDIO
FORMAT
DOLBY METADATA
Teranex 3D has XLR connectors for analog or AES audio input
and output, plus LTC timecode in and out.
Conversions
Once you have powered your Teranex processor and connected your inputs and outputs, you
are ready to perform a conversion. To set a conversion, the first thing to do is set your input and
confirm the input signal.
Setting your input
1
Press the 'in' button on the left side of the control panel. The button will illuminate
when selected.
2
Using the 'video' buttons, select the SDI, HDMI, analog or optical video input.
3
When your input is selected, you will see the image displayed on the built in
LCD and your Teranex will automatically detect the input format and illuminate all
the corresponding buttons, including format and frame rate.
FRAME
RATE
ASPECT
576
P
23.98
24
ANAM
14:9
LBOX
CCUT
1080
I
25
50
PBOX
ZOOM
29.97
59.94
PSF
SMART
ADJ
30
60
FRAME
RATE
ASPECT
REMOTE IN/OUT
REF IN
Y/NTSC/PAL IN
B-Y IN
R-Y IN
Y/NTSC/PAL OUT
B-Y OUT
IN A
IN B
LOOP A
LOOP B
IN
OUT
HDMI
SD/HD/3G-SDI
MENU
VIDEO
PRESETS
AUDIO STATUS
HOME
GAIN
BLK
1
2
MENU
SAT
HUE
3
4
1
SYSTEM STATUS
MENU
R-Y
SHARP
5
6
2
B-Y
MENU
VIDEO
PRESETS
R-Y OUT
STEREO IN
TIMECODE IN
TIMECODE OUT
AUDIO IN 1
AUDIO IN 2
AUDIO OUT 1
PUSH
PUSH
PUSH
L
OUT A
OUT B
R
PANEL
LOCK
REM
LOCK
AUDIO OUT 2
Getting Started
5 5