Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 239

Command
HDMI Output:
Output option:
Quad ancillary replication:
Quad SDI output:
Still frame present:
Still load complete:
Still store complete:
Transition setting:
Video Proc Amp
Command
Gain:
Black:
Saturation:
Hue:
RY:
BY:
Sharp:
Command Description
For Teranex AV only. Select the color space for the HDMI
output. Values are: YCbCR422, RGB444
For Teranex AV only. Select one of four signals to be used as
the output of the unit. Values are: Input, Black, Still, Freeze.
The " Transition setting " command controls the transition rate.
For Teranex AV and Express. True = replicate the ancillary data
on all four quad link outputs. False = ancillary data on quad
output A only.
For Teranex AV only. Select the quad SDI output mode. Values
are: QuadLink, QuadHDSplit.
For Teranex AV only. True = still frame has been stored at the
current output format. False = no still frame has been stored at
the current output format.
Cannot be changed by the user.
For Teranex AV only. True = loading of still frame data from the
internal non-volatile flash drive has completed.
Cannot be changed by the user.
For Teranex AV only. True = transfer of still frame data to the
internal non-volatile flash drive has completed.
Cannot be changed by the user.
For Teranex AV only. Set the transition rate between the
choices made in the Output Options menu. Range is: 0 (cut) to
50 (50 = 5 seconds, where 1 unit = 0.1 second)
Command Description
Set the output video level. Range is -60 to +60 (Default = 0)
Set the black level of the video output. Range is -30 to +30
(Default = 0)
Set the saturation of the video output. Range is -60 to +60
(Default = 0)
Set the hue of the video output. Range is -179 to +180
(Default = 0)
Set the R-Y color difference level of the video output.
Range is -200 to +200 (Default = 0)
Set the B-Y color difference level of the video output.
Range is -200 to +200 (Default = 0)
Set the sharpness of the video output.
Range is -50 to +50 (Default = 0)
デベロッパーの皆様へ
239 239