Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 66

Generate Menu for Teranex AV only
The Teranex AV can be used as a reference generator via its 'reference output' connection.
The type of reference signal, black burst or Tri-level, is dependent on the output video format of
the Teranex AV. Some video formats permit the use of specific reference types only. For
example, if NTSC is your Teranex output format, only black burst at 59.94Hz will be generated.
Similarly, for a 1080p23.98 output, only tri-level sync is possible. Other formats, such as
1080i59.94, allow the use of either type. The different Tri Level reference levels are Tri-level
progressive, or TRI-P, and Tri-level interlaced, or TRI-I.
Ethernet System Setup
Processing
Still
Frame
System Setup>Reference
When your output
video format is
525i59.94 NTSC
625i50 PAL
720p50
720p59.94
720p60
1080p23.98
1080PsF23.98
1080p24
1080PsF24
1080p25
1080PsF25
1080p29.97
1080PsF29.97
1080p30
1080PsF30
1080i50
1080p50
1080i59.94
1080p59.94
1080i60
Factory
Type Reference
Reset
Blackburst
Reference Generate
TriLevel
Info
Reference>Generate
Your choices for generated reference signals are:
Blackburst 59.94
Blackburst 50
Blackburst 50 or Tri-level Progressive 50
Blackburst 59.94 or Tri-level Progressive 59.94
Tri-level Progressive 60
Tri-level Progressive 23.98
Tri-level Interlaced 47.96
Tri-level Progressive 24
Tri-level Interlaced 48
Blackburst 50 or Tri-level Progressive 25
Blackburst 50 or Tri-level Interlaced 50
Blackburst 59.94 or Tri-level Progressive 29.97
Blackburst 59.94 or Tri-level Interlaced 59.94
Tri-level Progressive 30
Tri-level Interlaced 60
Blackburst 50 or Tri-level Interlaced 50
Blackburst 50
Blackburst 59.94 or Tri-level Interlaced 59.94
Blackburst 59.94
Tri-level Interlaced 60
Pixel
Offset
Line
Offset
Teranex Processor Settings 66 66