Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 962

Command
Variable Aspect Ratio size X left:
Variable Aspect Ratio size X right:
Variable Aspect Ratio size Y left:
Variable Aspect Ratio size Y right:
Variable Aspect Ratio pos X left:
Variable Aspect Ratio pos X right:
Variable Aspect Ratio pos Y left:
Variable Aspect Ratio pos Y right:
Variable Aspect Ratio trim X left:
Variable Aspect Ratio trim X right:
Variable Aspect Ratio trim Y left:
Variable Aspect Ratio trim Y right:
Variable Aspect Ratio zoom/crop:
Video Adjust
Command
Red:
Green:
Blue:
Luma low:
Luma high:
Chroma low:
Command Description
Adjust horizontal image size. Negative values decrease size;
positive values enlarge the image. Default = 0
Adjust horizontal image size of the Teranex 3D right eye
output. Negative values decrease size; positive values
enlarge the image. Default = 0
Adjust vertical image size. Negative values decrease size;
positive values enlarge the image. Default = 0
Adjust vertical image size of the Teranex 3D right eye output.
Negative values decrease size; positive values enlarge the
image. Default = 0
Adjust horizontal position of the image. Negative values move
the image to the left; positive values, to the right. Default = 0
Adjust horizontal position of the Teranex 3D right eye output.
Negative values move the image to the left; positive values,
to the right. Default = 0
Adjust vertical position of the image. Negative values move
the image upward; positive values, downward. Default = 0
Adjust vertical position of the Teranex 3D right eye output.
Negative values move the image upward; positive values,
downward. Default = 0
Trim the sides of the image. Default = 0
Trim the sides of the Teranex 3D right eye output. Default = 0
Trim the top and bottom of the image. Default = 0
Trim the top and bottom of the Teranex 3D right eye output.
Default = 0
Enables Zoom/Crop. False=OFF; True=ON (Default = False)
Command Description
Set value of Red color correction control.
Range is -200 to +200 (Default = 0)
Set value of Green color correction control.
Range is -200 to +200 (Default = 0)
Set value of Blue color correction control.
Range is -200 to +200 (Default = 0)
Set luminance low level value to clip undershoots.
Range is 4 to 1018 (Default = 4)
Set luminance high level value to clip overshoots.
Range is 5 to 1019 (Default = 1019)
Set chrominance low level value to clip undershoots.
Range is 4 to 1018 (Default = 4)
962 962