3D Menu Settings - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

‚ The transition setting has no effect on a Freeze frame. When freeze is selected,
the Teranex AV will immediately cut to the freeze frame regardless of the transition
setting. Audio will be muted.
When you're ready to switch from Freeze to Input, Black or Still, the transition will
obey the rules of the transition setting described above. In the example below, the
audio on Source 2 will fade in with the video at the same rate.
Press the front panel knob or turn it fully counterclockwise to reset the transition rate to zero.
Output options, transition settings and still frame controls are also available via remote control
in the Blackmagic Teranex Setup utility.

3D Menu Settings

The '3D' menu is available only in the Teranex 3D processor model. This menu enables the dual
internal processors of the Teranex 3D Processor for format or frame rate conversion of
stereoscopic inputs and for conversion of 2D sources into simulated 3D outputs.
Video Main Menu
Audio
Noise
Reduction
Ancillary
Data
Main Menu>3D
System
3D Mode 3D
Setup
Off
Input
Convert
2D to 3D
3D Output
3D Align
3D Menu>3D Mode
Intensity
Depth
Camera
Align
Teranex Processor Settings 69 69