Installing Admin Software
Software Installation
Blackmagic Teranex Setup is used to update your Teranex processor and to change conversion
settings remotely. The software is very easy to use, and all the settings for any connected Teranex
units can be accessed by clicking on each respective unit's settings icon on the Home page.
Installation on Mac OS X
1
Download the Blackmagic Teranex Setup software from www.blackmagicdesign.com
2
Unzip the downloaded file and open the resulting disk image to reveal its contents.
3
Double click the installer and follow the prompts to complete the installation.
Installation on Windows
1
Download Blackmagic Teranex Setup from www.blackmagicdesign.com
2
Unzip the downloaded file. You should see a Blackmagic Teranex Setup folder
containing this PDF manual and the Teranex setup utility installer.
3
Double click the installer and follow the prompts to complete the installation.
4
When the installation has finished, it will prompt you to restart your computer.
Click 'restart' to complete the installation.
Once your computer has restarted, Blackmagic Teranex Setup will be ready to use.
After downloading and unzipping the
Blackmagic Teranex Installer, simply launch
the installer and follow the install prompts.
Installing Admin Software
7 7