Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 31

3 Using the soft menu buttons, select 'change'. The output video is now displayed on the
LCD and sent to all output connectors. The buttons will also illuminate blue to confirm
your settings.
VIDEO
IN SDI
HDMI
OUT ANLG
Press the 'out' button to select your output settings.
In the above illustration the output is set to 1080i50.
Setting your Frame Rate Conversion Aperture
When converting frame rates you'll need to set the appropriate frame rate aperture.
Select your settings from 0 'Drama' to 3 ' Sport' depending on the amount of motion in your
video. These settings are adjusted using the soft menu buttons and rotary knob.
1 Press the 'home' button.
2 Using the soft menu buttons, select Video>Advanced>FRC Aperture.
3 Using the rotary knob, select the aperture setting most suited to your video.
Video Main Menu
Audio
Noise
Reduction
Ancillary
Data
Main Menu>Video
Setting your Aspect Ratio
When up, down or cross converting between HD and Ultra HD, the aspect ratio will always be
16:9, so no aspect ratio buttons will be illuminated. However, the 'adj' adjustable aspect ratio
function is always available when converting within the same format if you wish to make any
manual adjustments.
When converting from one format to another, for example SD to HD, other aspect ratio settings
will become available. Your Teranex Processor is now ready to convert your 1080i59.94 video
to 1080i50.
TIP For more information on aspect ratio conversion refer to
"Aspect Menu" on page 35 and "Aspect Ratio Conversions" on page 23.
AUDIO FORMAT FRAME
486 576
EMBED
AES 720 1080
2K
ANLG
1080
System
Color Video
Setup
Clip
Aspect
Setup
Video>Advanced Menu
RATE
P 23.98 24 ANAM
LBOX
I 25 50
PBOX
29.97 59.94
PSF SMART
30 60
Proc Clean
Amp Cadence
Test Scene
Patterns
Detect
Advanced
Advanced Menu>FRC Aperture
ASPECT
14:9
CCUT
ZOOM
ADJ
Source
FRC Aperture
Type
0 (Drama)
FRC
Aperture
1
2
3 (Sport)
Conversion Workflows 31 31