Audio Setup Menu - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

‚ If Dolby encoded audio is present on your 'AES' input, you cannot mix 'AES' with other
audio input types. In this situation, you should select 'AES' as your input type.
Input Mapping
Prev
Input 1/2 Source
Embedded 1/2
Embedded 3/4
Embedded 5/6
Embedded 7/8
Embedded 9/10
Reset
All
Embedded 1/2 mapped to
Input 1/2 Source
Audio Gain Menu
The 'audio gain' control allows you to vary the output from -32 to +16 dB in 0.1 dB increments.
Turn the knob to adjust. Pressing the knob will return the 'gain' to zero.
Video Main Menu
Audio
Noise
Reduction
Ancillary
Data
Main Menu>Audio
Audio Delay Menu
The maximum audio delay is 1 second. In the menu, you may chose between a 'time delay' or
'frame delay' adjustment. Time is resolved to millisecond resolution, while frame delay is
expressed in one-half frame increments. In addition, audio may be advanced by up to 1 frame.
Turn the knob to adjust. Pressing the knob will return the 'delay' to zero.
Output
Audio
Mapping
Audio
Gain
Audio
Delay
Setup
Audio Menu>Audio Delay

Audio Setup Menu

In Teranex processors with analog audio inputs, the 'audio setup' menu includes an analog
audio input reference level adjustment and analog input type selection.
Analog In Level for Teranex 2D and Teranex 3D
Teranex 2D and 3D processors are factory set to analog audio input reference levels of +
= -20dBFS. If you are using a different analog input reference level, you may adjust the 'level'
control to compensate.
NOTE This setting will not affect the RCA audio input level.
Input Mapping
Next Prev
Input 3/4 Source
AES 5/6
AES 7/8
ANLG-DB25 1/2
ANLG-DB25 3/4
Reset
All
ANLG-DB25 1/2 mapped to
Input 3/4 Source
System
Audio
Audio
Setup
Mapping
Output
Audio
Options
Gain
0.0
Audio
Delay
Setup
Audio Menu>Audio Gain
Turn knob to adjust gain
Input Time
Audio Delay
Delay
Mapping
Frame
Delay
0.000
Turn knob to adjust Time Delay
Next
Audio
Meters
Time
Audio Delay
Delay
Frame
Delay
0.0
Turn knob to adjust Frame Delay
Teranex Processor Settings 47 47