Connector Pin-Outs For The Teranex 2D; Analog Audio Inputs/Outputs - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

DB-25 Connector Pin-outs
for the Teranex 2D
Teranex 2D has a pair of RCA inputs so you can connect 2 channels of analog audio for left and
right input, but there is also a DB-25 multi pin connector on the rear panel that lets you connect
up to 4 analog audio channels, both input and output.

Analog Audio Inputs/Outputs

When you select the 'anlg' button on the front panel as the audio input type, a menu page will
appear on the front panel LCD allowing you to choose which of the two analog audio sources
you want to use.
When using the DB-25 connector, an optional breakout cable is required, which is a standard
Yamaha format cable for balanced XLR connections. This inexpensive breakout cable may be
purchased through many vendors, or may be fabricated using off the shelf connectors and cable.
Analog
Audio Channel
1 IN
2 IN
3 IN
4 IN
1 OUT
2 OUT
3 OUT
4 OUT
Teranex 2D Processor analog audio pin connections.
13 12 10 8 7 6 5
25 24 23 22 21 20 19 18 17 16 15 14
DB-25 pin outs also compatible with Yamaha™, Mackie™,
Sony™ and Apogee™ connectors.
Hot Pins ( + ) Cold Pins (–)
1
2
3
4
5
6
7
8
4 3 2 1
Ground Pins
14 10
15 12
16 13
17 22
18 23
19 24
20 25
21 25
DB25 Connector Pin-outs for the Teranex 2D 97 97