Command
AudioInLevel2:
AudioInLevel3:
AudioInLevel4:
AudioInLevel5:
AudioInLevel6:
AudioInLevel7:
AudioInLevel8:
AudioInLevel9:
AudioInLevel10:
AudioInLevel11:
AudioInLevel12:
AudioInLevel13:
AudioInLevel14:
AudioInLevel15:
Enter the value as a whole number of gain in dB times 10 (e.g. For +4dB, enter a value of 40). Range
is -32dB (-320) to +16dB (160). Default =0.
Output Mapping
You may choose any active audio input channel, Dolby-decoded channel, test tone or mute to be
mapped to each discrete audio output channel or Dolby-encoded output channel. Dolby encoding and
decoding require optional Dolby modules, which can be installed in the Teranex 3D only.
Available source values are:
Command
Inputs:
Dolby decoded inputs:
Test tones:
Please note: AudioOut0: refers to output channel 1, AudioOut1: refers to output channel 2, etc.
Command
AudioOut0:
AudioOut1:
AudioOut2:
AudioOut3:
Command Description
Set audio level (gain) for Channel 3
Set audio level (gain) for Channel 4
Set audio level (gain) for Channel 5
Set audio level (gain) for Channel 6
Set audio level (gain) for Channel 7
Set audio level (gain) for Channel 8
Set audio level (gain) for Channel 9
Set audio level (gain) for Channel 10
Set audio level (gain) for Channel 11
Set audio level (gain) for Channel 12
Set audio level (gain) for Channel 13
Set audio level (gain) for Channel 14
Set audio level (gain) for Channel 15
Set audio level (gain) for Channel 16
Command Description
AudioIn1 through AudioIn16
AudioDD1 through AudioDD8
TT750 (750kHz), TT1500 (1.5 kHz), TT3000 (3kHz), TT6000
(6kHz), TTMute
Command Description
Select source to be mapped to output Ch 1.
Select source to be mapped to output Ch 2.
Select source to be mapped to output Ch 3.
Select source to be mapped to output Ch 4.
デベロッパーの皆様へ
229
229