AFD Insertion Menu
This menu allows you to select the desired AFD code that will be inserted in the output video.
The output line on which the code will be inserted can be selected in the AFD Insert Line menu.
Settings include:
Off
No AFD code will be inserted in the output ancillary data space.
Auto
The appropriate code will be inserted based on the current video output format.
Bypass
Any code present in the incoming video stream will be passed through to the output.
AFD codes 0000 – 1111
These codes are manual selections which may be used as needed.
The default setting is 'off'.
Index
Video Index
Reaction
Off
Auto
Bypass
0000
0001
Video Index Menu>AFD Insertion
AFD Insert Line Menu
If AFD Insertion is enabled in the 'AFD insertion' menu above, the 'AFD insert line' menu allows
you to select the line on which the AFD code will be inserted in the ancillary data space of the
output video signal.
The range of adjustment is dependent on the current output video format:
For SD formats, the range is lines 10 to 19. The default value is line 15.
For HD 1080 formats, the range is lines 9 to 20. The default value is line 11.
For HD 720 formats, the range is lines 9 to 25. The default value is line 11.
Press the rotary knob to go back to the default value.
Index
Video Index
Reaction
11
Video Index Menu>AFD Insert Line
AFD
Insertion
AFD
Insert Line
AFD
Insertion
AFD
Insert Line
Teranex Processor Settings
59
59