Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento página 72

3D Mode 3D
Input
0
Output
3D Menu>2D to 3D>Depth
Camera Align menu
The 'camera align' button will be enabled only when you select '3D align' in the '3D mode'
menu. The camera alignment application performs a variety of processing adjustments to a
stereoscopic stream, including image zoom, flip, horizontal & vertical positioning and axial
rotation adjustment. Adjustments may be made to the individual eyes or you may link the left
and right eye images and simultaneously adjust both eyes of the stereoscopic image by the
same amount.
‚ Default Settings
As with other menus in the Teranex Processors, you may push the rotary knob to return
the current parameter to its default setting. Use the 'reset all' menu button to return all
controls in the current menu to their default settings.
Position Menu
The 'position menu' provides for horizontal and vertical position adjustment of each image. You
may individually select the left or right eyes, or adjust both eyes simultaneously.
‚ The range of values shown in the positioning dial will change depending on the output
format you have chosen; however, the range will always be -50% to +50% of the picture
size, horizontally and vertically. For 1080 outputs, the range of positioning is -959 to
+959 pixels horizontally and -539 to +539 lines vertically. For 720 outputs, the range
is-639 to +639 pixels and -359 to +359 lines.
‚ A positive horizontal value indicates a shift to the right.
‚ A negative horizontal value indicates a shift to the left.
‚ A positive vertical value indicates a shift upward.
‚ A negative vertical value indicates a shift downward.
3D Mode 3D
Off
Input
Convert Convert
2D to 3D
Output
3D Align
3D Menu>Camera Align
Horizontal Position
Vertical
0
Reset
All
Camera Align >Left Eye
Horizontal
Intensity
Depth
Camera
Align
Intensity Position Camera Align
Depth Rotation
Camera
Flip
Align
Reset
All
Camera Align Menu
Left Eye Horizontal Position
Right Eye Vertical
0
Both Eyes
Reset
All
Camera Align >Left Eye Vertical
Zoom
Trim
Left Eye
Right Eye
Both Eyes
Teranex Processor Settings 72 72