Output Format - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

‚ Internal
Synchronizes the output of the Teranex AV to its internal freerunning oscillator, which
produces constant sync in the output stream, even when changing inputs to the unit.
Video Main Menu
Audio
Noise
Reduction
Ancillary
Data
Main Menu>System Setup
Type Reference
Input
Generate
External
Reference>Type Menu for
Teranex 2D, 3D and Express
External Reference Compatibility Chart
Your external reference must be compatible with the current output video format. The table
below lists the external reference signals acceptable for each output video format and frame
rate. This chart is also applicable for reference signals generated by the Teranex AV in the
Generate menu.
If external reference is selected and a valid reference signal is detected, the 'REF' status LED on
the front panel will illuminate. If the external reference is removed or lost, the 'REF' LED will be
turned off and the processor will go into a free run condition until the reference is restored.

Output Format

and Frame Rate
525i59.94 NTSC
625i50 PAL
720p50
720p59.94
720p60
1080p23.98
1080PsF23.98
1080p24
1080PsF24
1080p25
1080PsF25
1080p29.97
System
Ethernet System Setup
Setup
System Setup>Reference
Pixel
Type Reference
Offset
Line
Generate
Offset
Internal
External
Reference>Type Menu
for Teranex AV
Reference
Signal
Blackburst 59.94
Blackburst 50
Blackburst 50
Blackburst 59.94, Tri-level Progressive 59.94
Tri-level Progressive 60
Tri-level Progressive 23.98, Tri-level Interlaced 47.96
Tri-level Progressive 23.98, Tri-level Interlaced 47.96
Tri-level Progressive 24, Tri-level Interlaced 48
Tri-level Progressive 24, Tri-level Interlaced 48
Blackburst 50, Tri-level Progressive 25, Tri-level Interlaced 50
Blackburst 50, Tri-level Progressive 25, Tri-level Interlaced 50
Blackburst 59.94, Tri-level Progressive 29.97, Tri-level Interlaced 59.94
Factory
Reset
Reference
Info
Pixel
Offset
Input
Line
Offset
Teranex Processor Settings 64 64