Conversion Workflows - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

Conversion Workflows

This section of the manual demonstrates the set up workflows for the main conversions you can
perform with your Teranex Processor. All conversions such as standards conversion, up, down
and cross conversion, follow the same general set up using the front control panel. You will also
see how to save and recall presets for frequently used conversions and how to set cadence
settings so you can clean or remove cadence in material using 3:2 pull down.
TIP When setting up a conversion, the status LEDs on the control panel let you
monitor exactly what signals are present. You can find more information in the
'Audio and System Status LEDs' section.
Up Conversion
Up Conversion is the process of converting your video to a higher resolution. For example,
you may need to insert an NTSC SD source into an HD production. The NTSC clip can be
converted to many 720 and 1080 HD output formats and frame rates, depending on your project's
requirement. Teranex processors employ high quality de-interlacing and up conversion algorithms,
assuring outstanding results. In this example, 486i59.94 component analog video is converted to
1080p29.97 using zoom aspect ratio and RCA analog audio inputs on the Teranex 2D or 3D.
Power your Teranex Processor and connect your inputs and outputs.
Setting your Input
1 Press the 'in' button on the control panel and select 'anlg' video. The 'analog input'
menu will be displayed on the LCD.
2 Using the rotary knob, select 'component' as your analog input type. Press the 'in'
button to display your input video on the LCD. Teranex automatically detects the input
format and illuminates the corresponding buttons on the control panel.
3 Press the 'anlg' audio button. Using the rotary knob, select RCA as your analog audio
input type.
VIDEO
IN SDI
HDMI
OUT ANLG
Pressing the IN button displays the input format on the control panel buttons. In the above
illustration, the input format is 486i59.94 via analog component with analog audio.
Setting your Output
1 Press the 'out' button on the control panel. On the Teranex 2D, all output buttons will be
illuminated blue. On the Teranex 3D, the 'embed' audio button will be blue. Select the
'AES' or 'anlg' button. AES/EBU and analog audio outputs share the XLR connectors.
On the Teranex Express, the 'embed' audio button will be blue.
AUDIO FORMAT FRAME
486 576
EMBED
AES 720 1080
2K
ANLG
1080
RATE
P 23.98 24 ANAM
LBOX
I 25 50
PBOX
29.97 59.94
PSF SMART
30 60
ASPECT
14:9
CCUT
ZOOM
ADJ
Conversion Workflows 25 25