Protocol Commands
Command
Align size X left: 0.000000
Align size X right: 0.000000
Align size Y left: 0.000000
Align size Y right: 0.000000
Align pos X left: 0.000000
Align pos X right: 0.000000
Align pos Y left: 0.000000
Align pos Y right: 0.000000
Align trim X left: 0
Align trim X right: 0
Align trim Y left: 0
Align trim Y right: 0
Command Description
Set the Horizontal Size (X) (Zoom) value for the Left Eye.
Negative values decrease size; positive values enlarge the
image. Default = 0
Set the Horizontal (X) Size (Zoom) value for the Right Eye.
Negative values decrease size; positive values enlarge the
image. Default = 0
Set the Vertical (Y) Size (Zoom) value for the Left Eye.
Negative values decrease size; positive values enlarge the
image. Default = 0
Set the Vertical (Y) Size (Zoom) value for the Right Eye.
Negative values decrease size; positive values enlarge the
image. Default = 0
Set the Horizontal (X) Position value for the Left Eye. Negative
values move the image to the right; positive values move the
image to the left. Default = 0
Set the Horizontal (X) Position value for Right Eye. Negative
values move the image to the right; positive values move the
image to the left. Default = 0
Set the Vertical (Y) Position value for the Left Eye. Negative
values move the image down; positive values move the
image up. Default = 0
Set the Vertical (Y) Position value for the Right Eye. Negative
values move the image down; positive values move the
image up. Default = 0
Set the Horizontal (X) Trim value for the Left Eye; performs
symmetrical adjustment on the right and left sides of the
image. Default = 0
Set the Horizontal (X) Trim value for the Right Eye; performs
symmetrical adjustment on the right and left sides of the
image. Default = 0
Set the Vertical (Y) Trim value for the Left Eye; performs
symmetrical adjustment on the top and bottom of the image.
Default = 0
Set the Vertical (Y) Trim value for the Right Eye; performs
symmetrical adjustment on the top and bottom of the image.
Default = 0
952
952