Noise Reduction Menu Settings - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

Metadata Parameter
Original Bitstream
Extended Bitstream Info 1
Preferred Stereo Downmix
Lt/Rt Center Downmix Level
Lt/Rt Surround Downmix Level
Lo/Ro Center Downmix Level
Lo/Ro Surround Downmix Level
Extended Bitstream Info 2
Dolby Surround EX Mode
Dolby Headphone
A/D Converter Type
DC Filter
Lowpass Filter
LFE Lowpass Filter
Surround Phase Shift
Surround 3 dB Attenuation
RF Mode Compression Info
RF Mode Compression Profile
Line Mode Compression Info
Line Mode Compression Profile

Noise Reduction Menu Settings

The 'noise reduction' algorithm in Teranex processors looks at each pixel in an image and
processes it based on motion and types of noise. Spatial noise reduction is applied to still areas
of the picture and temporal recursive noise reduction is applied to moving areas. Using both
types provides higher quality results.
To enable noise reduction, go to Main Menu>Noise Reduction and select 'on' using the soft
menu buttons and rotary knob.
NOTE 'Noise reduction' is not available while performing frame rate conversions, such
as 486i59.94 to 576i50 NTSC to PAL or 1080i59.94 to 1080i50.
Video Main Menu
Audio
Noise
Reduction
Ancillary
Data
Main Menu>Noise Reduction
Stereo
Yes
Yes
Not Indicated
-3 dB
-3 dB
-3 dB
-4.5 dB
Yes
Not Indicated
Not Indicated
Standard
Enabled
Enabled
Disabled
Disabled
Disabled
None
Film Standard
None
Film Standard
System
Enable Noise Reduction
Setup
On
Bias
Off
Noise Reduction Menu
5.1
Yes
Yes
Not Indicated
-3 dB
-3 dB
-3 dB
-4.5 dB
Yes
Not Indicated
Not Indicated
Standard
Enabled
Enabled
Enabled
Enabled
Enabled
None
Film Standard
None
Film Standard
Split
Screen
Red
Overlay
Teranex Processor Settings 51 51