Ancillary Data Menu Settings
The 'ancillary data' menu provides access to closed caption, timecode and video index features.
Closed Caption Menu
The 'closed caption' menu lets you configure closed captions for CEA-608B and CEA-708B
standards. CEA-608B is the closed captioning reference standard for SD NTSC analog and
SD-SDI. Captions are encoded on line 21 of the vertical blanking interval. CEA-708B is the
standard for HD-SDI, typically encoding captions on line 9.
The Teranex processor automatically detects digital captions in both SD and HD video formats.
If digital captions are not present in an SD signal, the processor will look for analog captions on
line 21. If the program has captions on line 21 but you're not seeing them, set the 'analog in line'
menu to look for captions on lines 20 or 22.
TIP
Closed caption processing also supports up conversion of 608 CC2 and CC3
secondary language services to 708 Service 2, or S2, via the 'service 2 source' menu.
Video
Main Menu
Audio
Noise
Reduction
Ancillary
Data
Main Menu>Ancillary Data
Closed
Ancillary Data
Caption
Timecode
Ancillary Data
Menu>Closed Caption
The 'closed captioning' menu offers the following selections and adjustments:
CC Enable
Turns 'closed captions' 'on' or 'off' in the output video.
Analog In Line
Allows you to select the analog 'closed caption' input line.
Analog Out Line
Allows you to select the analog 'closed caption' output line.
Service 2 Source
Allows you to select between CC2 and CC3 as the 'closed caption' 'service 2' source.
Service 1 Language
Allows you to select the language used for 'service 1'.
Service 2 Language
Allows you to select the language used for 'service 2'.
System
Closed
Ancillary
Setup
Caption
Data
Timecode
Ancillary Data Menu
Video
CC
Closed Caption
Index
Enable
On
Analog
In Line
Off
Analog
Out Line
Reset
All
Closed Caption
Menu>CC Enable
Video
Index
Service 2
Source
Service 1
Language
Service 2
Language
Teranex Processor Settings
53
53