Video Output - Blackmagic Design BMD-TERANEXEXP12GDL Teranex Express Manual De Instalación Y Funcionamiento

Command
Audio source:
PCIe mode:
Signal present:
Timecode present:
Closed captioning present:
Wide SD aspect:
Optical module present:
Video pixel format:

Video Output

Command
Video mode:
Aspect ratio:
Video demux mode:
Output SDI mode:
Video pixel format:
Analog output:
Command Description
Select the audio input type. Values are model dependent.
Teranex 2D: Embedded, AES, RCA, DB25.
Teranex 3D: Embedded, AES, RCA, DB25.
Teranex Express: Embedded.
Teranex AV: Embedded, AES, RCA, DB25.
For Teranex 2D and 3D: Display the status of the
Thunderbolt connection. Values are: Capture, Playback,
None.
Cannot be changed by the user.
True indicates presence of input video.
False indicates no input video is present.
Cannot be changed by the user.
Detected indicates presence of timecode.
None indicates no timecode is present.
Cannot be changed by the user.
Detected indicates presence of closed captions.
None indicates no closed captions are present.
Cannot be changed by the user.
Values are: True or False. False indicates the SD source is
4:3. True indicates the SD source is widescreen and should
be displayed in an SD output in a Letterbox mode.
Indicates the presence of an installed fiber optic SFP
module. True=Installed; False=Not installed
Displays input pixel format, e.g. YCrCb422.
Cannot be changed by the user.
Command Description
The Video Mode may be set to any available output video
format. Refer to the format conversion table for output
formats available in your Teranex. For example, 2160p59.94.
The Aspect Ratio value may be set to an aspect ratio
appropriate for the current conversion. Values are based
on availability in the device and the current conversion:
Anamorphic, Letterbox, CentreCut, 14x9, Smart.
The Video demux mode applies to the Teranex 3D and
Teranex Express. Values are: SingleLink, DualLink, QuadLink.
This command corresponds with the 'SDI Output' LCD menu.
For Teranex AV and Teranex Express only, select the 3G-SDI
output type. Values are LevelA, LevelB. This command
corresponds with the '3G-SDI Output' LCD menu.
The Video pixel format applies to the Teranex 3D only.
Values are: YCbCr422, RGB422, RGB444.
Select the analog video output type.
Values are: Composite, Component
722 722
开发人员信息