Honda Motor BF40D Manual Del Usuario página 316

[1]
AIR VENT
1
TUBE C
2
[2]
3
TUBE CLIP B10
4
[12]
5
5 x 45 mm TUBE
6
[11]
7
TUBE CLAMP
D18.8
8
9
[10]
OIL TUBE
10
11
[13]
12 FUEL TUBE C
Insert aligning the " " mark
with the " " mark on the
13
fuel pump [low pressure
side].
14
[17]
" " MARK
15
[23]
16
" " MARK
[22]
17
TUBE CLIP B10
Install with the tab
18
toward the engine.
19
[8]
T-JOINT
20
[15]
TUBE CLIP B10
Install with the
tab toward up.
[12]
5 x 45 mm TUBE
[21]
AIR VENT TUBE C
Insert into the engine under
case installation hole.
2-84
[2]
[3]
TUBE CLIP B10 WATER TUBE B
[9]
FUEL TUBE A
[15]
TUBE CLIP B10
Install with the
[14]
tab toward up.
" " MARK
[20]
WATER TUBE A
Insert aligning the " " mark
with the projection on the
vapor separator assembly.
316
[4]
WATER TUBE C
[5]
VAPOR SEPARATOR
ASSEMBLY
[6]
FUEL TUBE C
[7]
[8] WATER TUBE A
T-JOINT
[16]
WATER TUBE C
Insert the water tube C aligning
the " " mark with the projection
on the vapor separator, and
[14]
insert it into the T-joint with the
" " MARK
" " mark toward out.
[17]
" " MARK
[18]
PROJECTION
[15]
TUBE CLIP B10
Install with the
tab toward up.
[17]
" " MARK
[15]
TUBE CLIP B10
Install with the
tab toward up.
[19]
WATER TUBE B
Insert into the T-joint with
the " " mark toward out.
[2]
TUBE CLIP B10
[18]
PROJECTION