Honda Motor BF40D Manual Del Usuario página 384

4) Turn the alternator rotor counterclockwise further until the
pulser rotor additionally turns by 3 ridges of the gear.
1
• Turn the alternator rotor counterclockwise. Never turn it
clockwise.
2
• Do not touch the timing belt tensioner and do not push
the tensioner toward the belt while turning the timing
belt.
3
4
5
6
7
8
9
10
11
12
5) Holding the pulser rotor in the position described in step 4,
13
tighten the 10 x 38 mm flange bolt of the timing belt
tensioner to the specified torque.
14
TORQUE: 45 N . m (4.6 kgf . m, 33 lbf . ft)
15
6) Install the timing belt tensioner cap.
16
7) Install the following parts.
- Alternator cover (P. 7-2)
17
- Engine cover (P. 4-2)
18
19
20
3-25
[1]
Turn 2 revolutions,
then turn by 3 ridges
of the gear.
[1]
TIMING BELT
TENSIONER CAP
10 x 38
384
[2]
PULSER ROTOR
[2]
TIMING BELT
TENSIONER