Publicidad
Idiomas disponibles
Idiomas disponibles
Getting Started
11
ATEM Production Studio 4K
ATEM 1 M/E Production Studio 4K
ATEM 2 M/E Production Studio 4K
ATEM Television Studio
ATEM 1 M/E Production Switcher
ATEM 2 M/E Production Switcher
Understanding the ATEM Switcher
The ATEM switcher provides all the video processing as well as all video input and output connectors,
connection for control panels and power connections. You use the switcher by connecting and using
various types of control panels. This allows the switcher to be located remotely, such as in machine rooms
where it's closer to the connected video devices, while the control panel can be placed in a location from
where it is easier to run production.
ATEM Production Studio 4K supports SD, HD and Ultra HD 4K video and is capable of switching 8 external
inputs from its SDI and HDMI connectors. The front panel keypad lets you select instantly between auxiliary
output sources and the small LCD gives you instant feedback on the status of the auxiliary output.
ATEM 1 M/E Production Studio 4K supports SD, HD and Ultra HD 4K video and is capable of switching 10
external inputs from its SDI and HDMI connectors. Input 1 is selectable between the HDMI Input 1 and SDI
Input 1 connector. The front panel keypad lets you select instantly between 3 auxiliary output sources and
the small LCD gives you instant feedback on the status of the auxiliary outputs.
ATEM 2 M/E Production Studio 4K supports SD, HD and Ultra HD 4K video and is capable of switching 20
external inputs from its SDI and HDMI connectors. Input 1 is selectable between the HDMI Input 1 and SDI
Input 1 connector. The front panel keypad allows on-the-fly selection of the 6 auxiliary output sources and
the large LCD gives instant confirmation of your aux output content.
ATEM Television Studio supports SD and HD video and is capable of switching 6 external inputs from its SDI
and HDMI input connectors. Inputs 3 and 4 are selectable between HDMI and SDI, which can be set in the
ATEM software control panel settings tab.
ATEM 1 M/E Production Switcher supports SD and HD video and is capable of switching 8 external inputs
from its analog, SDI and HDMI input connectors. Input 1 is selectable between the HDMI Input 1 connector
and the analog component Input 1 connector and is set in the ATEM software control panel settings tab.
ATEM 2 M/E Production Switcher supports SD and HD video and is capable of switching 16 external inputs
from its SDI and HDMI input connectors. Input 1 is selectable between the HDMI Input 1 connector and the
SDI Input 1 connector and is set in the ATEM software control panel settings tab.
When running an ATEM model with an external heat sink, you might notice the switcher chassis feels warm
to the touch. This is normal dissipation of operational heat and not a fault.
Publicidad
