Blackmagic Design ATEM 1 M/E Manual De Instalación Y Funcionamiento página 92

Operating your ATEM Switcher
92
DVE border parameters
The knobs and soft buttons in the system control are used to adjust the border parameters.
There are multiple parameters, each requiring an adjustment, therefore the soft/color button and SHIFT
button is used to toggle the parameters that each knob adjusts.
Border Enables or disables the border.
Shadow Enables or disables drop shadow.
This control is toggled between these two color settings (including light direction)
Soft/Color
and softness settings (including size). Capital letters indicate which settings are
currently selected for control.
Out Width Adjusts the outside width of the border.
Out Soft Outside softness adjusts the outside edge of the border, the edge that touches
the background video.
Bevel Soft Bevel softness adjusts the overall softness of the 3D border. A high value for this
parameter will result in a rounded or beveled border.
Opacity Opacity adjusts the transparency of the border, use this setting to create
interesting colored glass borders.
Hue Changes the border color. The hue value is a location on the color wheel.
Sat Changes the intensity of the border color.
Change the brightness of the border color.
Luma
Lite Dir Adjusts the direction of the light source on the DVE or picture in picture. Both the
border and drop shadow, if available, are affected by changes to this setting.
Border menu parameters (hold shift button)
In Width Adjusts the inside width of the border.
In Soft Adjusts inside softness. This softness parameter adjusts the inside edge of the
border, the edge that touches the video.
Adjusts the position of the 3D bevel on the border.
Bevel Pos
Lite Alt Adjusts the distance of the light source from the DVE or picture in picture. Both
the border and drop shadow, if available, are affected by changes to this setting.