Blackmagic Design ATEM 1 M/E Manual De Instalación Y Funcionamiento página 19

Getting Started
19
Plugging in Audio
All ATEM switchers include a built in audio mixer which allows the use of embedded HDMI and SDI audio
from your cameras as well as external audio from the dedicated audio inputs. These audio inputs can be
used for other audio sources such as camera microphones and pre-recorded audio.
The ATEM Production Studio 4K range features built in balanced XLR audio inputs and outputs as well as
unbalanced RCA audio inputs so you can connect an external audio source directly. If you have an ATEM
1 M/E or 2 M/E Production Switcher you can use the included breakout cable to connect your external
audio source's professional, balanced analogue audio output to the switcher.
RCA audio connectors are useful when using audio from consumer equipment such as a HiFi system or
iPod. The XLR inputs are electrically balanced and designed to reduce interference and noise, especially
when long cable lengths are required.
See Using Audio for more on connecting additional audio sources.
The audio breakout cable included with ATEM 1 M/E and 2 M/E Production Switchers connects to the AUDIO IN/OUT port.