Blackmagic Design ATEM 1 M/E Manual De Instalación Y Funcionamiento página 68

Operating your ATEM Switcher
68
Transition
Mix Dip
1:00 1:00
Set Rate Set Rate
To perform a mix transition on the broadcast panel
FTB Step 1. On the preview bus, select the video source that you want on the program output.
1:00
Step 2. Press the DIP/MIX button to select the mix transition type. The system control automatically
Set Rate
Step 3. In the control system, use the knob to adjust the mix rate. The transition rate display in the
Step 4. Perform the transition as an auto transition or manual transition from the transition control block.
Mix Transition Parameters
Mix
Dip Transitions
A DIP is similar to a mix in that it is a gradual transition that transitions from one source to another. However,
a dip transition gradually mixes through a third source, the dip source. For example, the dip transition
can be used for a transition that calls for a white flash or a transition that quickly flashes the sponsor logo.
The length of the dip transition and the dip source can both be customized.
navigates to the transition menu. To manually navigate to the transition menu press HOME >
TRANS.
transition control block will update dynamically. You can also enter a rate duration using the
number pad followed by the set rate button.
The mix transition rate in seconds : frames.
Program output for a dip transition.