Blackmagic Design ATEM 1 M/E Manual De Instalación Y Funcionamiento página 29

Using ATEM Software Control
29
Using Keyboard Hot Keys
Hot keys can be used allowing convenient control of some switcher functions using a standard QWERTY
keyboard as shown in the following table:
Hot Keys
<1> - <8>
<Shift> <1> - <8>
<Control> <1> - <8>
Press and release <Control>,
then <1> - <8>
<Control> <Shift> <1> - <8>
Press and release <Control>,
then <Shift> <1> - <8>
<Control>
<Space>
<Return> or <Enter>
More information on how to use the switcher control panel is included in the next sections.
Audio Mixer
The Audio tab in ATEM Software Control contains an audio mixer interface which becomes active when
controlling any ATEM switcher.
Function
Previews source on switcher Inputs 1 - 8
Previews source on switcher Inputs 9 - 16
Hot switches source on switcher Inputs 1 - 8 to Program output
Hot switches source on switcher Inputs 1 - 8 to Program output.
Hot switching remains on and the CUT button is lit red.
Hot switches source on switcher Inputs 9 - 16 to Program output
Hot switches source on switcher Inputs 9 - 16 to Program output.
Hot switching remains on and the CUT button is lit red.
Turns off hot switching if currently on. The CUT button is lit white.
CUT
AUTO