Blackmagic Design ATEM 1 M/E Manual De Instalación Y Funcionamiento página 54

Using the ATEM 2 M/E Broadcast Panel
54
CUT CUT CUT CUT DIP CUT CUT AUX 7 AUX 8 AUX 9 AUX 10 AUX 11 AUX 12 DEST
SHIFT
KEY 1 KEY 2 KEY 3 KEY 4 BORD STNG DVE AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6
SHIFT
Camera Camera Camera Camera Camera Camera Black Color Player Media Media Player Color Color Media Player Player Media
1 2 3 4 5 6 Bars 1 2 1 2 1 Key 2 Key
SHIFT
CUT CUT CUT CUT DIP CUT CUT AUX 7 AUX 8 AUX 9 AUX 10 AUX 11
KEY 1 KEY 2 KEY 3 KEY 4 BORD STNG DVE AUX 1 AUX 2 AUX 3 AUX 4 AUX 5
CUT CUT CUT CUT DIP CUT CUT CUT CUT CUT DEST
KEY 1 KEY 2 KEY 3 KEY 4 BORD STNG DVE BOX 1 BOX 2 BOX 3 BOX 4 SHIFT
DSK 1 DSK 2 SSRC
BKGD
SHIFT
Media Media Media Media
Camera Camera Camera Camera Camera Camera Camera Camera Player Player Black Color Color Color Player Player
1 2 3 4 5 6 7 8 1 2 Bars 1 2 1 Key 2 Key
MIX
PREV
TRANS
SHIFT
Media Media
Camera Camera Camera Camera Camera Camera Color
Black
Player Player
1 2 3 4 5 6 Bars
1 2
ATEM Mix Effects
CUT CUT CUT CUT DIP CUT CUT CUT CUT CUT
BOX 1 BOX 2 BOX 3
KEY 1 KEY 2 KEY 3 KEY 4 BORD STNG DVE DSK 1 DSK 2 SSRC
Media Media
Camera Camera Camera Camera Camera Camera Camera Camera Color
Player Player Black
1 2 3 4 5 6 7 8 Bars
1 2
Preview Bus
ON ON ON ON
The preview bus is used to select a source on the preview output. This source is sent to program when the
BKGD KEY 1 KEY 2 KEY 3 KEY 4 FTB
BOX 4
M/E 2 M/E 2
PATT KEY BOX 2
DIP
WIPE STNG DVE
MIX next transition occurs. The selected source is indicated by a button that is illuminated green. A blinking
M/E 1 M/E 1 BOX 4
PATT KEY
BOX 2
TRANS EFFECTS DSK COLOR PREV
KEYS KEYS TRANS
MEDIA
PLAYER green button indicates that the shifted source is on preview. Pressing the SHIFT button will display the
PANEL CUT AUTO
SETUP
1 2 3
AUX 12
DEST
4 5 6
SHIFT
AUX 6
shifted source.
7 8 9
ON ON ON ON
CAM 0 CLR
KEY 1 KEY 2 KEY 3 KEY 4
FTB
DSK 1 DSK 2
TIE SHIFT TIE
DIP
WIPE STNG DVE
SHIFT
EFFECTS DSK
TRANS KEYS KEYS COLOR
DSK 1 DSK 2
CUT CUT
MEDIA
AUX PLAYER
CUT AUTO PANEL DSK 1 DSK 2
SETUP AUTO AUTO
Media Media
Color Color
Player Player The SHIFT button provides a global shift and is used to shift the program, preview and select busses along
1 2
1 Key 2 Key
with source labels. It also provides a shift for the transition type and joystick and other menu functions.
TRANS
Double-pressing buttons in the preview, select and destination busses, as well as the transition style
MEDIA
PLAYER
buttons, is the same as shift-selecting them and can be a faster way to shift-select buttons. Double-pressing
SHIFT PANEL
SETUP
is not implemented for the program bus as it would cause the program output to momentarily show the
wrong source.
DEST
BOX 4 ON
SHIFT
Destination Bus and Select Bus
BKGD KEY 1
SHIFT
The destination bus gives you 1 key access to make changes to sources in your cuts and fills, borders and
dip colors, stinger fills and cuts, DVE logos and cuts, and down stream fills and cuts. To assign a source to
Media Media
Color Color DIP
Player Player
1 2
1 Key 2 Key WIPE
MIX
one of these destinations, select any destination in the Destination bus and make your source selection in
the Select bus below it.
PREV
TRANS
The destination bus works in conjunction with the source names display and select bus to assign sources to
SHIFT
auxiliary outputs and keyers.
The source names display and select bus together show you the routing of sources to keys and auxiliary
outputs. The currently selected source is indicated by an illuminated button. A blinking button indicates a
shifted source. A green illuminated button identifies a protected source. Protected sources are program,
preview, clean feed 1 and clean feed 2.
DEST SHIFT
To access the shifted destinations in the destination bus, hold down the DEST SHIFT button at the right side
of the bus and make your selection.
CUT/KEY
When a key setup menu is selected and a CUT/KEY button is pressed, the select bus changes to show
the currently selected cut signal (also known as the Key signal) for that key. When selecting sources for
auxiliary outputs, pressing the two SHIFT buttons displays program, preview, clean feed 1 and clean feed 2
as sources for selection on the select bus.
ON ON ON ON
BKGD KEY 1 KEY 2 KEY 3 KEY 4 FTB
DIP
WIPE STNG DVE
MIX
EFFECTS DSK
COLOR PREV
KEYS KEYS
TRANS
CUT AUTO
ON ON ON
KEY 2 KEY 3 KEY 4
FTB
STNG DVE
EFFECTS DSK
TRANS COLOR
KEYS KEYS
MEDIA
AUX
PLAYER
CUT AUTO PANEL
SETUP
BOX 4
M/E 2 M/E 2
PATT KEY
BOX 2
BOX 4
M/E 1 M/E 1
PATT KEY
BOX 2
1 2 3
4 5 6
7 8 9
CAM 0 CLR
DSK 1 DSK 2
TIE TIE
DSK 1 DSK 2
CUT CUT
DSK 1 DSK 2
AUTO AUTO